Power system RPN-8000

The RPN8000 Sequence Power With Filters offers the easiest method to control power up and power down sequencing of multiple independent voltage rails. By staggering the start up sequence, it is possible to avoid latch conditions or large in-rush currents that can affect the reliability of the system. The RPN8000 Sequence Power With Filters helps you to sequence the turn on and turn off of all your electronic devices. This is really convenient when dealing with audio devices such as power amplifiers, where the sequence power is very important. Take control of your power with our RPN8000 Sequence Power With Filters.

FEATURES

The biggest feature is add a 2-stage EMI/EMC noise filter on the basis of the control in 1018, that can block many interferences enter the equipment from the power supply such as strong ratio、electric spark and others, will make a positive effect in sound quality and stability.
The cascade and network control are connected through the RJ45 of the front panel, the communication mode has RS-232, RS-485, TCP/IP three ways.

TECHNICAL DATA

Power connection: single phase dynamic air-controlled power switch

Connector:NXB-63
L.N/PE:16mm2
Ground terminal:ground connection terminal accessory Channels qty: 8channels
Output enable channels:8channels
Power condition: single phase 3 line
Connection type:compatible socket
Output max.current:63A(AC230V)
Each channel max.output current:30A/60s or 10Arms Sequence control each step time space:editable free
Power filter qty: 8pcs build-in independent filters, each channel has 1pcs
Power filter data:level 2 filtering,  damping 40dB at 150kHz-3MHz

USB socket max. output voltage/current:5V/Max.2A

Power:AC230V±10%  50Hz

LOGISTICS DATA

Single Carton size...............550x410x90mm

Single Carton gross weight..................5.80kg

Units per master carton..............................4

Master carton size..............570x420x400mm

Master carton gross weight................23.5kg