Analog processor RPX3400

3-/4-Way Active XO
Stereo 3-way/Mono 4-way configurations | Limiter | CD Horn correction

The RPX-3400 is a stereo 2/3-way |mono 4-way active crossover, designed for better sound and protection by multi-amping a sound system. With a flip of the rear side switch, the unit can be configured either in stereo 2/3-way or mono 4-way mode, while the front panel status LEDs visualize which control has which function assigned. The incoming signal is divided into relative frequency bands via precise Linkwitz-Riley filters, which sport seamlessly adjustable crossover frequencies, and offer best driver protection by their steep 24dB/Octave slope. For further protection, 25 Hz Low Cut filters are fitted in both inputs to eliminate inaudible high-energy bass content, and limiters on all outputs are provided with central threshold control. LF driver misalignment is easily accounted for by the adjustable delay control, and the typical roll-off of constant directivity horns can be counteracted with a switchable filter. To make the best use of centrally located subwoofers, the LF outputs can be summed via the “LF SUM” function, making sure that in-phase signals from all subs deliver extra gain. Mute and Phase Invert switches for all outputs make troubleshooting a breeze. Compared to digital loudspeaker management systems, the RPX-3400 is not only more affordable, it also offers greater ease-of-use and a full 20dB signal headroom that only an analog processor can provide.

Features

· Stereo 2-way/3-Way/Mono 4-way active crossover

· Linkwitz-Riley filters with 24 dB/octave slope; flat summed amplitude response, zero phase difference

· Low/Mid Crossover frequencies adjustable in two switchable ranges: 44 to 930 Hz and 440 Hz to 9.3 kHz; Mid/High frequencies adjustable 440 Hz to 9.3 kHz 

· Adjustable time delay for phase alignment between drivers

· “LF Sum” function for mono subwoofer operation

· Individual Limiters on every output

· Individual output level controls for all bands

· Individual output mute switches for all bands

· Individual phase reverse switches for all bands

· CD horn equalization (+3 dB at 3.5 kHz, 6 dB/Oct. boost up to 22.5 kHz)

· Switchable 25 Hz low cut filter in each input

· Balanced XLR connectors for all inputs and outputs

· All switches with LED status indicator

· Internal wide-voltage swing linear power supply for excellent audio dynamics

·  Full metal case with detachable rack ears

· AC mains voltage selector switch 115/230V

· CE/ROHS compliant

Data

·         Signal/Noise ＞88dBu (unweighted 22Hz-22KHz)

·         Crosstalk Damping ＞92dB

·         THD ＜0.01%  

·         Frequency response 20Hz – 20 kHz

·         AC supply 115/230V~ 50Hz-60Hz (23W)

·         Dimension 483.0×44.5×162.0 mm WxHxD

·         Weight 2.3 kg